The AM Forum
April 20, 2024, 12:04:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Cathode Modulating 2x 810's  (Read 1611 times)
0 Members and 1 Guest are viewing this topic.
W4RFM
Member

Offline Offline

Posts: 397



WWW
« on: November 03, 2020, 04:32:45 PM »

So I am looking at an old copy of QST, April 1940 to be exact, and I see this.  What are your thoughts and opinions?


Interesting that the mod iron impedance is almost exactly that of a Heathkit Apache 11K / 3K.
I just checked (the Bay) and 809's are still available, although i am sure a later /better pair of tubes could be used.
810's are there also but both types are a little spendy, for my taste.
Logged

BOB / W4RFM  \\\\\\\"I have looked far and wide, (I also checked near and narrow)\\\\\\\"
WD5JKO
Member

Offline Offline

Posts: 1997


WD5JKO


« Reply #1 on: November 04, 2020, 08:19:39 AM »


good reference thread on CM:
http://amfone.net/Amforum/index.php?topic=45471.0
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.035 seconds with 18 queries.