The AM Forum
April 16, 2024, 11:50:54 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: ART-13 160 meter modification  (Read 2148 times)
0 Members and 1 Guest are viewing this topic.
Chuck...K1KW
Contributing
Member
*
Offline Offline

Posts: 167
« on: August 16, 2020, 02:10:30 PM »
Does anyone have the article from the Dec 2003 ER that describes the 160 M mod mentioned in another thread?

It seems this issue is sold out on the ER site and I'm unable to find it anywhere

Thanks!

Chuck
Logged
73, Chuck...K1KW
WU2D
Contributing
Member
*
Offline Offline

Posts: 1800


CW is just a narrower version of AM
« Reply #1 on: August 16, 2020, 09:16:11 PM »
Chuck I have it and will get you something by email. That article is good. He uses two small relays to switch in padding caps.

The original Article on doing this modification; I wrote in 1991. I was WB2UID then. It is in the December 1991 issue of ER, page 24. I padded the VFO & 1st multiplier tank using a single DPDT remotely switched relay.
Logged
These are the good old days of AM
WU2D
Contributing
Member
*
Offline Offline

Posts: 1800


CW is just a narrower version of AM
« Reply #2 on: August 18, 2020, 11:29:25 AM »
Chuck,

Ray forgive me, but I scanned the 1991, 2003 and 2003 Corrections articles and sent them along to Chuck by email.

73's Mike WU2D
Logged
These are the good old days of AM
Chuck...K1KW
Contributing
Member
*
Offline Offline

Posts: 167
« Reply #3 on: August 18, 2020, 11:55:03 AM »
Hi!

I received all the info I need.  Thanks again!

Chuck
Logged
73, Chuck...K1KW
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: ART-13 160 meter modification
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.032 seconds with 18 queries.