The AM Forum
March 28, 2024, 05:40:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: T-368 How to Adjust the plate overload relay  (Read 1309 times)
0 Members and 1 Guest are viewing this topic.
w4ax
Member

Offline Offline

Posts: 11


WWW
« on: March 08, 2020, 03:19:38 PM »

Friends,

I have a new to me T-368 and the plate protection circuit is tripping at too low a current per the manual. The manual describes removing the 4-400 and clamper tubes then connecting a 5900 ohm 1500 watt variable load to the B+ in series with an amp meter.

Since I don't have a suitable variable load I'd like to know if someone has discovered another way to load the B+ safely. I'm very experienced working around high voltage and vintage equipment.

Thanks in advance for any suggestions.

vy 73,

Mack
W4AX
Logged

73,

Mack
W4AX
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 19 queries.