The AM Forum
April 23, 2024, 02:38:24 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Hammarlund HQ-110 project radio  (Read 2141 times)
0 Members and 1 Guest are viewing this topic.
Avery W3AVE
Member

Offline Offline

Posts: 95


« on: February 05, 2020, 04:42:50 PM »

Picked up at an estate sale. Not bad-looking, but...no clock and no plastic lens where the clock belongs. Several wires dangling near the clock space come from below the chassis and could be part of the clock circuit; they are tagged but I don’t want to trace them. All tubes are present, including an OB2 that I supplied, but are untested. The front panel isn’t bad; call it a 6 out of 10. I cleaned the worst of the grunge from the chassis. When the rest is removed it will be a 7 or even an 8. Underneath, nothing has exploded, leaked, or otherwise self-destructed. It does have the cabinet, which is about a 6 or 7. 

Is $75 reasonable?

Pick up in zip 20854 or make your own shipping arrangements—I pack well but do NOT want to spend hours to protect a receiver that is a nice model but no R-390A.

Email me direct at acomarow [at] gmail [dot] com.


* Front panel.JPG (660.42 KB, 2016x1512 - viewed 376 times.)

* Chassis top view.jpg (859.08 KB, 2016x1512 - viewed 361 times.)

* Below chassis.jpg (866.22 KB, 2016x1512 - viewed 379 times.)
Logged
Avery W3AVE
Member

Offline Offline

Posts: 95


« Reply #1 on: February 05, 2020, 04:44:20 PM »

Additional photos of the cabinet


* HQ-110 cabinet top.jpg (999.35 KB, 2016x1512 - viewed 286 times.)

* Cabinet rear.jpg (560.65 KB, 2016x1512 - viewed 271 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.052 seconds with 18 queries.