Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Transformer Re-Winding Source

The AM Forum
July 03, 2020, 01:51:49 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Transformer Re-Winding Source  (Read 507 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 234

« on: November 04, 2019, 11:22:33 AM »

My idea of using an Antek replacement went bust. The
Transformer I ordered came in 1/2" over the spec sheet
diameter and will NOT fit in the space available.

So, I am back to looking for someone to repair the
HV Transformer (HV Sec shorts to frame). I checked
Heyboer, they will sell me a new transformer, but the
cost is prohibitive.

There must be someone out there who will repair this
30 pound mass of Iron and Copper !!

73, Dick, W1KSZ
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.052 seconds with 18 queries.