Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Manual / schematic -Westrex 9200B Driver (seems unobtanium)




 
The AM Forum
September 19, 2019, 08:01:29 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Manual / schematic -Westrex 9200B Driver (seems unobtanium)  (Read 148 times)
0 Members and 1 Guest are viewing this topic.
Opcom
Patrick J. / KD5OEI
Contributing
Member
*
Offline Offline

Posts: 7287



WWW
« on: July 11, 2019, 11:20:59 PM »

Looking for the schematic or book on this beautifully made amplifier. Any help would be appreciated.

Says "Westrex 9200B Driver" on the front.

This Westrex driver amplifier uses two 8117 tubes to make about 100W, I was told.
Continuously tunable 1.5 to 31 MHz using that one crank and the round dial scale.
I think the input drive is very low like for a 6146 in AB1.
This was used to drive a larger amp with a 4CX3000A.

Nobody but nobody seems to have any data on this, or on the system it was part of.

Westrex stuff - all I can find is a lot of audio gear including Western Electric (parent company), and the Westrex products made for VOX in the UK. Westrex Communications did make some Marine AM/SSB sets and a big Fax modem for weather and Navy use. It's unclear if this was before or after Litton bought the firm.

Thank you
Patrick KD5OEI


* westrex2b.jpg (76.02 KB, 882x444 - viewed 45 times.)

* westrex3ab.jpg (128.19 KB, 774x624 - viewed 48 times.)
Logged

Radio Candelstein - Flagship Station of the NRK Radio Network.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.042 seconds with 18 queries.