The AM Forum
April 24, 2024, 08:04:09 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Drake 2B Issue  (Read 1984 times)
0 Members and 1 Guest are viewing this topic.
WA4WAX
Member

Offline Offline

Posts: 417
« on: April 11, 2019, 12:43:46 PM »
I am refurbishing a Drake 2B.  The S meter zero pot flunked a variac test (smoke).  I am trying to source a new one. 

It looks like a 2 watt pot, but is through hole with a recessed plastic slot.  The adjustment point is just above the bandswitch.

Any ideas on where I might find one?

Thanks!!!
Logged
KE5YTV
Contributing
Member
*
Offline Offline

Posts: 354
« Reply #1 on: April 11, 2019, 04:12:47 PM »
The Drake radio group should be able to give you great guidance.

drakeradio-subscribe@yahoogroups.com
Logged
Mike
KE5YTV  Dallas, TX
"The longest trip begins with a stop at the ATM."
ab1mn
Member

Offline Offline

Posts: 14
« Reply #2 on: April 12, 2019, 10:53:19 AM »
Hi,

I have a 2B parts chassis. If you can't find a replacement, I will dig it out and take a look for you (its currently buried under three dead NCX-3s. If you want it, send me the mailing information as a private message.

Bob
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Drake 2B Issue
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.