The AM Forum
March 28, 2024, 08:08:26 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: National MB-150 Multi-Band Input/Output Tank Assembly: Sold! Thanks, AM Fone!  (Read 3344 times)
0 Members and 1 Guest are viewing this topic.
W2XR
Contributing
Member
*
Offline Offline

Posts: 890



« on: March 14, 2019, 08:12:05 PM »

I am doing my annual shack cleaning, and I have a used National MB-150 Multi-Band Tank Assembly. I believe it can be used in push-pull and single-ended output tank circuit designs, with an RF output of 150 watts or less. It can also be used in the grid input stage when the drive/input power is 150 watts or less.

Unfortunately, I have no other technical information available pertaining to this unit.

It is quite dirty from age, but it should clean up nicely with a little elbow grease.

The price is $50.00, plus the cost of shipping to your QTH.

Please contact me at triodes@optonline.net

Thanks & 73,

Bruce, W2XR
Logged

Real transmitters are homebrewed with a ratchet wrench, and you have to stand up to tune them!

Arthur C. Clarke's Third Law: "Any sufficiently advanced technology is indistinguishable from magic".
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.