The AM Forum
April 19, 2024, 07:29:17 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Clapp VFO project  (Read 1207 times)
0 Members and 1 Guest are viewing this topic.
W1IA
Member

Offline Offline

Posts: 778
« on: January 28, 2022, 09:46:32 AM »
Almost done with the project. Using Jay’s design W1VD. A little more wiring and seal the enclosure after testing.
http://www.w1vd.com/16080VFO.html

* DF9A2A2E-C872-4E98-AA99-2879832D6467.jpeg (2462.14 KB, 4032x3024 - viewed 267 times.)

* 1D46668E-322A-46C3-845D-0DDDA128E2D0.jpeg (3302.42 KB, 4032x3024 - viewed 293 times.)
Logged
Run What Ya Brung!
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > QSO > Topic: Clapp VFO project
« previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.064 seconds with 19 queries.