The AM Forum
March 29, 2024, 11:29:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: SX-117 Revision Identification  (Read 1802 times)
0 Members and 1 Guest are viewing this topic.
W1KSZ
Member

Offline Offline

Posts: 247


« on: December 07, 2018, 09:23:43 PM »

I know there are a few revisions to the SX-117 (A thru E or F), but how can
one tell from the Serial Number which Rev Level the receiver was built to ?

Thanks, Dick, W1KSZ
Logged
WE1X
Member

Offline Offline

Posts: 70



« Reply #1 on: December 07, 2018, 10:38:59 PM »

Dick,

I had an SX-117 I worked on about a year ago.  The following link should help.

http://k9axn.com/_mgxroot/page_10882.html


Check the mentioned resistor values in your actual receiver against those in the article.

I'm not sure there is a direct correlation between serial number and revision.

Harry WE1X
Logged
nq5t
Contributing
Member
*
Offline Offline

Posts: 557



« Reply #2 on: December 07, 2018, 11:39:27 PM »

I know there are a few revisions to the SX-117 (A thru E or F), but how can
one tell from the Serial Number which Rev Level the receiver was built to ?

Thanks, Dick, W1KSZ

The serial number stamped into the chassis has a single letter suffix which indicates the rev level.
Logged
W1KSZ
Member

Offline Offline

Posts: 247


« Reply #3 on: December 08, 2018, 12:07:10 AM »

OK, that sounds good.

Thanks for the info.

73, Dick, W1KSZ
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.061 seconds with 19 queries.