Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Fall Classic Exchange with my SCR-274N

The AM Forum
August 16, 2022, 05:50:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Fall Classic Exchange with my SCR-274N  (Read 3239 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 203

« on: October 09, 2018, 11:35:10 AM »

Did anyone else play in last monthís Classic Exchange (CX) with their Mil Gear ?

I drove my SCR-274N for about 24 CW contacts on 40 and 80.    The receivers used an outboard power supply (I have a hum issue that I need to look at when using dynamotors) but the transmitters were powered by the dynamotor on the BC-456.    The power source were two tractor batteries in series across the float charge output of a 28V power supply.    Power out was just under 20W CW; a bit low but I was only getting about 23.5V key down off the batteries.

With only 8W output on AM I didnít even try.....  Undecided

73 Mark K3MSB
York, PA
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.106 seconds with 19 queries.