The AM Forum
December 03, 2024, 08:44:43 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Kenwood TS950SDX no output  (Read 2244 times)
0 Members and 1 Guest are viewing this topic.
WA7DUY
Member

Offline Offline

Posts: 15


« on: June 24, 2018, 11:36:34 PM »

I just acquired a Kenwood TS950SDX but it has zero output on all bands.  It came from an estate.  The person that sold it to me said the finals had been replaced with new ones as it had had this problem before and been back to a repairman for repairs twice.  The last time said it was repaired but was not.  Since there is no output and the finals are good (I assume) can anyone suggest other possible causes?

Thank you.
Logged
w4bfs
W4 Beans For Supper
Contributing
Member
*
Offline Offline

Posts: 1434


more inpoot often yields more outpoot


« Reply #1 on: June 25, 2018, 08:03:49 AM »

sounds like a parasite .... ss finals are graded by mfgr, usually with color dots or suffixes .... use of the wrong graded part with usually have instabilities, etc ....also these multiple replacements may have gotten the driver stage as well .... I would start at the earliest stage and find output of proper freq. and level and go from there .... warning !! this radio  may use surface mount parts ...good luck
Logged

Beefus

O would some power the gift give us
to see ourselves as others see us.
It would from many blunders free us.         Robert Burns
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.094 seconds with 18 queries.