Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
WANTED: RANGER II SCHEMATIC - FOUND IT




 
The AM Forum
September 19, 2018, 03:44:12 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WANTED: RANGER II SCHEMATIC - FOUND IT  (Read 144 times)
0 Members and 1 Guest are viewing this topic.
W1KSZ
Member

Offline Offline

Posts: 167


« on: June 15, 2018, 05:27:23 PM »

Looking for a Hi-Res pdf of the Ranger II Schematic. Something I
can print out on "D" size (11 X 17) paper.

So far, all I find on the Web is the original Ranger schematic.

Except for the addition of 6 Meters, I am not sure what other
changes were made.

I picked up a nice looking (except for the two holes some mis-guided
soul drilled in the front panel) Ranger II. It has some mods done
to it, along with the wire to nowhere !!
One end hangs in mid-air, the other goes to the Red light (XMT) on
the front panel.

Most of the tubes test OK, even those marked EF Johnson. Before I
try the "smoke" test, I need to see what other "features" have
been added.

Tnx for any leads,

73, Dick, W1KSZ
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.042 seconds with 18 queries.