The AM Forum
March 19, 2024, 05:55:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WANTED: Command Set Metal Work - Covers & Shields  (Read 1141 times)
0 Members and 1 Guest are viewing this topic.
W9DZ
Member

Offline Offline

Posts: 1


« on: April 25, 2018, 03:49:06 PM »

I have three command set receivers that look like they could be brought back to life. I acquired them from the estate of a friend. They are all missing various pieces of the sheet metal. Looking for one top and one bottom cover as well as two of the shields that cover the tuning capacitors and two of those that surround the vacuum tubes. Would be interested in hearing from anyone who might have any of these laying around. Plain aluminum or black wrinkle no difference to me. Contact off-list at w9dz@yahoo.com  Thanks!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 18 queries.