The AM Forum
March 19, 2024, 02:18:52 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Heathkit HP-23, Millen Coils, and 813 Tube  (Read 1263 times)
0 Members and 1 Guest are viewing this topic.
Jim/WA2MER
Contributing
Member
*
Offline Offline

Posts: 298



« on: April 24, 2018, 07:45:37 PM »

Looking for a Heathkit HP-23 or HP-23A power supply, an 813 tube (American made NOS or excellent used), and a set of 80 Meter coils for my Millen 90800 exciter.

The Millen part number for the coils, which is usually stamped on the ceramic bar, is 43082. Need two of them. If I don't find the coils, I'll settle for the ceramic plug that the Millen coils were built on and I will wind my own. See the photo for what it looks like. The pins are spaced 1/2" apart. I need a plug with only four pins like the one in the photo, but a five pin plug will do as well.

I'm going to NEAR-Fest, so I'd prefer to find my stuff up there in order to avoid shipping.

73,
Jim

* Millen 43082 Coil.pdf (371.14 KB - downloaded 146 times.)
Logged

Anything worth doing is worth doing to excess.
Since you have to die anyway, you might as well die from something you like.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.