The AM Forum
December 04, 2024, 01:16:20 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: CLASS D or CLASS E: Which One Should I Choose  (Read 10814 times)
0 Members and 1 Guest are viewing this topic.
W1KSZ
Member

Offline Offline

Posts: 245


« on: April 12, 2018, 09:43:25 PM »

I am getting more serious about building a Class D or E AM Transmitter, something in the 300 Watt avg range.

Before I can get started, I need to decide which Class to build, D or E.

What are the advantages of one over the other ? Which one should I choose and why ?

Also, after deciding, I will need a source of DIY info, schematics, pictures, etc.

Thanks for your help,

73, Dick, W1KSZ
Logged
W1KSZ
Member

Offline Offline

Posts: 245


« Reply #1 on: April 12, 2018, 09:47:33 PM »

My bad guys, I forgot I had a similar question earlier. Old age is a ^&*%*&.

73, Dick, W1KSZ
Logged
W2PFY
Contributing
Member
*
Offline Offline

Posts: 13291



« Reply #2 on: April 13, 2018, 09:58:54 AM »

I don't know a source for class D but Steve WA1QIX has about all could want for your edification.


http://www.classeradio.com/
Logged

The secrecy of my job prevents me from knowing what I am doing.
M0VRF
Member

Offline Offline

Posts: 177


« Reply #3 on: April 13, 2018, 03:04:32 PM »

I use Class D/E or that's what I think it is has class E waveforms with class D B/W = >1MHz on 40m.

If you stick to the design by VE3ELQ using the SiC FETs from Cree you'll be fine.

My version uses 4 GaN Fets and runs 100W carrier with 500W peaks with a 48V PSU.

Pic attached.



* tx.png (305.81 KB, 1028x703 - viewed 1073 times.)
Logged
n1ps
Contributing
Member
*
Offline Offline

Posts: 338


websdr http://sebagolakesdr.us:8901/


« Reply #4 on: April 15, 2018, 08:14:05 PM »

For Class E, go with the QIX designs.  Bulletproof and probably more than 100 have been built.  Steve gives you complete designs including the modulator (PWM) and even a VFO.

For Class D you can also look at Jay W1VD site.  He has some nice designs.  He recommends the QIX PWM I believe.

Either way these projects are intensive and take time  Wink.  I think it took me about a year to put together a class E project.  But well worth the effort IMHO.

Peter

Logged
steve_qix
Contributing
Member
*
Offline Offline

Posts: 2597


Bap!


WWW
« Reply #5 on: April 15, 2018, 09:10:03 PM »

It is possible to build a complete transmitter from the ground up, in about a month.  But of course it won't be a pretty as the one Pete (N1PS) built  Wink
Logged

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
KF1Z
Member

Offline Offline

Posts: 1796


Are FETs supposed to glow like that?


« Reply #6 on: April 17, 2018, 11:13:03 AM »

I noticed your post in "Wanted".
.
If you can populate a PC board, you can pretty likely build Steve's design.

A lot of folks have built these successfully with 'limited' skills.

Doesn't matter what the end product looks like, only matters that it works :-)

If there are certain parts that you decide you can't, or don't want to attempt, there are a few people around who can help you out as well.
Either by advice here, by email, or even putting together parts for you.

Logged

steve_qix
Contributing
Member
*
Offline Offline

Posts: 2597


Bap!


WWW
« Reply #7 on: April 17, 2018, 08:49:25 PM »

I noticed your post in "Wanted".
.
If you can populate a PC board, you can pretty likely build Steve's design.

A lot of folks have built these successfully with 'limited' skills.

Doesn't matter what the end product looks like, only matters that it works :-)

If there are certain parts that you decide you can't, or don't want to attempt, there are a few people around who can help you out as well.
Either by advice here, by email, or even putting together parts for you.



Holy Missing Person, Batman !!  Wow, Bruce - it's been FOREVER !!! What's going on?  Send me an email (I still have the same one I've had for 20 years).

Good to see you're still interested.

Regards,  Steve
Logged

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.037 seconds with 19 queries.