Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
6CW4 vs 6DS4

The AM Forum
March 17, 2018, 09:52:20 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: 6CW4 vs 6DS4  (Read 253 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 492

« on: February 20, 2018, 05:52:17 PM »

Doing a small restoration project on a receiver that uses 2 6CW4s. One tests marginal. I have a new 6DS4 which Iím told is interchangeable. Anyone know the difference?

Offline Offline

Posts: 82

« Reply #1 on: February 20, 2018, 06:12:25 PM »

According to this list the answer is yes:


Scroll down to the 6CW4.

Marietta Georgia

Offline Offline

Posts: 770

You never heard of a Ham Operator?

« Reply #2 on: February 20, 2018, 06:34:17 PM »

According to the RCA receiving tube manual RC-24, the 6CW4 has slightly larger transconductance 9800 umhos compared to the 6DS4 with 9000 umhos.  The plate resistance of the former is slightly smaller, 6600 ohms, compared to the latter 7000 ohms.  Thus the characteristic curves are slightly dis-similar.   

The manual also states that the 6DS4 is used in circuits to reduce cross-modulation because of its cutoff characteristics.  All other ratings are identical, so it should work fine as a direct replacement for the 6CW4.

Rick / W8KHK  ex WB2HKX, WB4GNR
Global Warming? Actually, it's much worse! On any given day, half the planet faces global warming whereas the other half faces global cooling! The warming half is facing the sun, and the cooling half is opposite the sun
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.07 seconds with 18 queries.