The AM Forum
December 11, 2024, 07:30:27 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
  Print  
Author Topic: Problem with Class E Modulator  (Read 31255 times)
0 Members and 1 Guest are viewing this topic.
vk3alk
Member

Offline Offline

Posts: 264


« Reply #25 on: January 31, 2018, 06:53:58 PM »

I forgot to mention too that the cores are gapped with PCB appox .8mm  ... the copper filed off....

And Justin on the wire used on your T300-2 cannot see why using multistrand would make any difference over solid wire that I find hard to get now as well  Angry


Wayne


Logged
steve_qix
Contributing
Member
*
Offline Offline

Posts: 2598


Bap!


WWW
« Reply #26 on: January 31, 2018, 08:00:19 PM »

For solid wire, I use Romex cable of the correct gauge and take it apart.  Works great!
Logged

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
steve_qix
Contributing
Member
*
Offline Offline

Posts: 2598


Bap!


WWW
« Reply #27 on: January 31, 2018, 08:06:09 PM »

I'm using IE33 Ferrite cores used in many Computer SMPS in the 350 watt - 500 watt range....
Its a 6 pole filter......the 1st inductor is 13uH .......2nd 51uH ..........3rd 37uH

The cutoff is appox 30Khz

Impedance of 6 Ohms

Voltage is around 42 volts @ 7 Amps


Wayne

I can't find any data on the cores you are using, so can't do any magnetic calculations.

But, I'm assuming you did some calculations or used software to plot the inductance over the current range of 0A to about 50A (the peak current at full modulation).  If the inductance varies more than 8% or thereabouts, the filter's effectiveness will be compromised at high levels of modulation.
Logged

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
vk3alk
Member

Offline Offline

Posts: 264


« Reply #28 on: January 31, 2018, 09:39:22 PM »

No to be honest... just listening on a receiver..... Roll Eyes

Have asked for data info from one company and if they reply will start a new post subject...


Thanks


Wayne

Logged
Pages: 1 [2]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.055 seconds with 19 queries.