The AM Forum
March 28, 2024, 05:18:36 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Labels  (Read 1959 times)
0 Members and 1 Guest are viewing this topic.
W1RKW
Contributing
Member
*
Offline Offline

Posts: 4410



« on: January 12, 2018, 04:53:04 PM »

If you need a inexpensive method for labeling a homebrew project, PM me.  I recently acquired a P-touch labeler that can do any font style and size up to 1 inch in either black or white on clear labeling material.  I just completed labeling my 813 rig which needed labeling after completing construction over 5 years ago and I'm very satisfied with the end result. Picture attached. As far as cost goes, all I ask is reimbursement for postage and $2 or $3 for the materials.  PM me for additional details if interested.  This is restricted to members of AMFone.net only.

The labels on the meters are the old labels. they were done on an ink jet printer with not so good results especially on the gray hammer tone finish of the front panels.


* DSCN2214.JPG (455.44 KB, 1600x1200 - viewed 399 times.)
Logged

Bob
W1RKW
Home of GORT. A buddy of mine named the 813 rig GORT.
His fear was when I turned it on for the first time life on earth would come to a stand still.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 18 queries.