Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Zorch, again on my 8-FET 75 meter transmitter

The AM Forum
February 23, 2018, 01:31:48 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 [2]   Go Down
Author Topic: Zorch, again on my 8-FET 75 meter transmitter  (Read 963 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 1672


« Reply #25 on: February 18, 2018, 10:57:55 PM »


    Very good on the class E rig, and repairs done.

I see your Hantek scope. I have the 100Mhz version otherwise just like yours. There is a Hack to make these scopes 200Mhz:


I have not tried this, but just passing it on.


Offline Offline

Posts: 948

Massachusetts Democrat

« Reply #26 on: February 18, 2018, 11:38:23 PM »

I raised my dipole ends and my tuner is now good to go.  Tomorrow I'll make tuning adjustments during the daytime.  

I don't think I'm going to touch the innards of my scope.  It's my first digital one, and I like them much better than the analog ones. I don't want to risk breaking it.  Besides, my highest measurements are at 7 MHz so it'll definitely handle that.    

One final thought.  In this new transmitter configuration, the VFO sits on top of the transmitter.  Since the 'enclosure' is made out of plexiglass, I thought that the RF fields might wreak havoc on the high quality Chinese construction of the VFO.  So, I put a copper plate underneath it and grounded the four corners to the threaded rods.  It seems to work well.  I didn't even want to try it without any shielding.  I'd probably have 8 blown FETs had I done so.


* IMG_0340.jpg (2213.84 KB, 4032x3024 - viewed 37 times.)

Pages: 1 [2]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.07 seconds with 19 queries.