Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
WANTED: Push-Pull SPST Switch - HRO, NC-100, NC-101X

The AM Forum
March 25, 2019, 12:42:59 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: WANTED: Push-Pull SPST Switch - HRO, NC-100, NC-101X  (Read 410 times)
0 Members and 1 Guest are viewing this topic.

Offline Offline

Posts: 113

« on: November 26, 2017, 07:37:40 PM »

Hello all,

I have begun a restoration of a National NC-101X and I am in need of the meter switch. It is SPST and of the push-pull type. I believe the switch contacts should be closed when the plunger is pushed in. This switch was used on the early HROs, NC-100s and NC-101Xs that had meters. It may have been used on other equipment as well. I have attached a picture of one that is in one of my HROs. Does anyone have one in their junk box or in a receiver carcass that they could spare?


Brian - W8KHZ

* Push-Pull Switch.JPG (362.85 KB, 1632x1224 - viewed 80 times.)

Currently running a big homebrew transmitter (pair of 250THs modulated by a pair of 810s) paired up with a National HRO-50.  I also run a BC-610-I / NC-2-40D combo which is a lot of fun too.

Catch you on 75M AM!
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.089 seconds with 19 queries.