The AM Forum
March 28, 2024, 01:55:58 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Meissner Parts etc Needed for 150-B Project  (Read 1142 times)
0 Members and 1 Guest are viewing this topic.
Todd, KA1KAQ
Administrator
Member

Offline Offline

Posts: 4310


AMbassador


« on: October 25, 2017, 08:50:12 AM »

Please check your junk boxes and parts bins. A first pass at the Meissner 150-B transmitter shows a need for the following parts(descriptions and part numbers are from the manual):

 R.F. Plate Choke: 10.32 MH, 200 M.A. DC, 2 pie winding, Meissner part # 02441

 Antenna Padding Condensers:

 - Mica 0.0003 Mfd +/- 5%, 2500 VDC, Sangamo part # A2LS-5330

 - Mica 0.0006 Mfd +/- 5%, 2500 VDC, Sangamo part # A2LS-5360

 - Mica 0.0012 Mfd +/- 5%, 2500 VDC, Sangamo part # A2LS-5212

(all of the above came with banana plugs installed, but I can fabricate these with the correct value micas)

 Plate Blocking Condenser: Mica 0.006 Mfd +/- 10%, 2500 VDC, Sangamo part # A2LS-5260

Also need one of the large plug-in plate coils, L-207

Will provide photos soon. Also need the antenna insulator and ground post, but at least need clear photos as I may have the porcelain on hand already. The manual photos aren't too great.

TNX
Logged

known as The Voice of Vermont in a previous life
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.