The AM Forum
March 28, 2024, 12:52:14 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: FS LARGE DESK TOP HOUSING TO INSTALL ELECTRONICS ITEMS LIKE AUDIO OR RECEIVERS  (Read 2086 times)
0 Members and 1 Guest are viewing this topic.
k4rhh
Contributing
Member
*
Offline Offline

Posts: 115


« on: September 21, 2017, 12:25:48 AM »

This is for a table top piece cabinet to install your elec equipment like audio mixers or a receiver and maybe a tx if it's not to big.these were used in public dispatch like police/fire/rescue.these are still in good condx. made of a particial board and covered w/ a gray coating.these are heavy about 45 lbs.20.5" tall, 22.25"wide.this is 17" front to back at top and 22.25" at the bottom.the lower part is slanted.the top opening is 19"wide and 5.25 up/down and has many threaded holes to screw in items. the bottom opening is 19" across and 10.5" up down ,all the part you mount to is metal black rails all the way around w/ threaded holes,this part has a tilt to it for easy operation.has a vent on top and a hole on one side to let wires in. the bottom and back are open and this has metal rails top/bottom sides (inside) for added support.i have 5 of these.due to the weight and size will not ship will have to pick up. i am in central va.these are $50 each.  Randy K4RHH rwcradiocollector@gmail.com


* 100_2833.JPG (674.67 KB, 2048x1536 - viewed 529 times.)

* 100_2835.JPG (659.15 KB, 2048x1536 - viewed 473 times.)

* 100_2836.JPG (639.25 KB, 2048x1536 - viewed 479 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.054 seconds with 19 queries.