The AM Forum
April 19, 2024, 06:51:44 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WANTED: SX-17 SCHEMATIC  (Read 1154 times)
0 Members and 1 Guest are viewing this topic.
W1KSZ
Member

Offline Offline

Posts: 247


« on: September 18, 2017, 01:12:58 PM »

I have rounded up the usual suspects, Bama and Riders (Mods.dk does not have it). They both are the same source.

What I would like is a schematic that shows pin numbers on tubes, id numbers (V1, V2 etc) and shows where all those
trimmers are that are on the bottom of the radio.

Does anything better than the one I found exist or do I start reverse engineeting ?

Tnx, Dick, W1KSZ
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.064 seconds with 18 queries.