The AM Forum
March 29, 2024, 11:26:30 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: 4-1000 Linear! HB w/32-V styling Vacuum Variables see it @ SUSSEX 'fest(Sunday)  (Read 3865 times)
0 Members and 1 Guest are viewing this topic.
WBear2GCR
Member

Offline Offline

Posts: 4135


Brrrr- it's cold in the shack! Fire up the BIG RIG


WWW
« on: July 03, 2017, 04:17:47 PM »


I've taken the decision to sell this 4-1000 linear.
I acquired it and another recently from an SK estate.
It is HB.
Made to look like a Collins 32V transmitter. It is NOT a Collins.

Large enough to make it a plate modulated rig if you wanted to.
Substantial size plate iron. Seems to be ~4kv.
Likely to have 240v & 120v primaries, but iirc it's 240v (you need 240 for a 4-1000 anyhow).
Vacuum variable caps.
You can see the crank type adjusters for the ANT and PLATE loading...
Large B&W tank coil/switch.
Eimac air system socket w/chimney & blower.
Medium (not B+ I don't think) sized variac. Like 1kva size.

Construction quality is "good". Nothing to ratty, but less good in some places like the PS
than in the RF deck which I rate as pretty good.

(btw, that's NOT a genuine Collins badge on the front - would be sweet if it was)

No clue on the schematic, you figure it out.

It's not going to be "plug n play". While it might run, I'd go through it carefully myself
if I wanted to use it. 

I've added up the parts value of just the main elements (socket, caps, tank, cranks, etc.) and
without the PS parts it looks pretty darn close to what I'm asking for the whole shebang. Cheesy

So, $700 w/o a 4-1000.
And $850 with a 4-1000. However, I have not fired up any of the 4-1000 that came with the rigs.
They were in the rigs, and presumed to work.

Haven't shot pix of the innards, but IF there is any interest, I will supply.

I plan to schlep this down to the SUSSEX NJ hamfest on Sunday.
Will also have some nice aluminum frame racks (they break down and will fit in many cars).

This can be seen in Albany NY, if it is not sold, or you get here before Sunday. (or it comes back with me)
Possibly I will meet someone 1/2 way or possibly deliver within <100miles approximately, as negotiated.

Sorry for the so-so photos. The first one is as it was found.
The second one, not so great either is how it arrived at my QTH, sitting next to the shorter linear (tan).

                        _-_-bear


* TWO LINEARS-a.JPG (544.46 KB, 1500x2000 - viewed 598 times.)

* TRANSMITTER PIC 4-1000 RIG.JPG (1044.3 KB, 2560x1920 - viewed 651 times.)
Logged

_-_- bear WB2GCR                   http://www.bearlabs.com
WBear2GCR
Member

Offline Offline

Posts: 4135


Brrrr- it's cold in the shack! Fire up the BIG RIG


WWW
« Reply #1 on: July 03, 2017, 04:20:31 PM »

Just noticed this shot of the back of the linear showing the PS + the RF deck... couldn't post them with the
original post, not allowed.

The inside of the Linear has been thoroughly cleaned, no dust or dirt or mousie dung (none found) is in there.
These shots were before I took it apart for cleaning, and replaced the chassis back in the rack.



* TRANSMITTER PIC 2.JPG (1078.03 KB, 1920x2560 - viewed 533 times.)

* TRANSMITTER PIC 1.JPG (1115.21 KB, 1920x2560 - viewed 523 times.)
Logged

_-_- bear WB2GCR                   http://www.bearlabs.com
WBear2GCR
Member

Offline Offline

Posts: 4135


Brrrr- it's cold in the shack! Fire up the BIG RIG


WWW
« Reply #2 on: July 17, 2017, 10:23:47 AM »

The linear did drive with me down to Suzzex Hamfeast.
It also decided to come home.

I made an obvious error in the original post - that's Collins 30K styling.

Anyhow the linear with the tube or without is FOR SALE.
I had it up at the 'fest for $800 WITH the 4-1000 tube.

Keep in mind, IF you do homebrew work, you can re-package this stuff, buy the whole
shebang for about what the parts would cost and make it the way you want. So, think of
this as parts, all in one place - one time, or a nicely built classy looking linear to get going and
on-the-air.

Here' the situation. I'm short on space here, for real. Motivated to sell it to someone
who wants to run it, or modify it into a plate modulated rig, etc..

During the months of July and August, I will consider putting it back in my van and
driving to drop it off, within reason. We can talk about that, if you are serious.

Please ask questions, come to see it.

Make me an OFFER that is real, and/or talk to me about a trade that turns out to interest
me and get me excited too. I do have another 4-1000 unit that I am prepping (from the same
deal that got me this one) so I don't need or want two.

                          --- signed, motivated seller  _-_-
Logged

_-_- bear WB2GCR                   http://www.bearlabs.com
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 18 queries.