The AM Forum
April 25, 2024, 06:05:16 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: The new standard in IMD....  (Read 1908 times)
0 Members and 1 Guest are viewing this topic.
KD6VXI
Contributing
Member
*
Offline Offline

Posts: 2652


Making AM GREAT Again!


« on: May 12, 2017, 12:16:49 AM »

Taken from amps.confesting.com

'
For the last two weeks, I've been testing the new ANAN 8000DLE.  Worst-case IMD at 200W is -75 dBc and close to -80 dBc on some bands.  The PSDR mRx result was cross-checked with an Agilent N1996A spectrum analyzer.  The combination of LDMOS, adaptive pre-distortion and a highly-isolated RF sample path back to the receiver's sampling input all contribute to this extraordinary level of transmitted IMD performance.

Paul, W9AC '



Wow......

--Shane
KD6VXI
Logged
WBear2GCR
Member

Offline Offline

Posts: 4135


Brrrr- it's cold in the shack! Fire up the BIG RIG


WWW
« Reply #1 on: May 12, 2017, 09:59:54 AM »

Making everyone else look bad!  Angry

 Roll Eyes
Logged

_-_- bear WB2GCR                   http://www.bearlabs.com
KD6VXI
Contributing
Member
*
Offline Offline

Posts: 2652


Making AM GREAT Again!


« Reply #2 on: May 12, 2017, 10:44:57 AM »

Yeah, I agree.

That was in reply to me posting about K1JJ and his 8877/4cx350 chain and it's - 55 db imd.  A couple folks had brought up that is probably the best you can hope for, using 'modern' equipment and not going to predistortion.

Will be interesting to see what a 3cx3k or 8877 pair would do wrapped into that system.  And at 200 watts, you can actually drive a 3000!

--Shane
KD6VXI
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 18 queries.