The AM Forum
March 28, 2024, 10:28:54 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: National NC-300 Part(s) Needed  (Read 1755 times)
0 Members and 1 Guest are viewing this topic.
W1KSZ
Member

Offline Offline

Posts: 247


« on: April 10, 2017, 12:31:35 PM »

In the process of bringing an NC-300 back to life. The first issue is that L5 (V3 Plate Circuit)
looks like it's open. At least that's what my preliminary tests show.

Anyone have a Parts NC-300 that I can get L5 from ?

I will be taking it out and looking inside, but since it's an 80 Kc Coil, it may not be repairable.
Probably Pi-wound sections. If the Gods smile on me, it might just be a bad connection at the
terminals, but I am not holding my breath.

So, it all depends on whether or not I can find a spare L5.

Tnx, Dick, W1KSZ
Logged
W1KSZ
Member

Offline Offline

Posts: 247


« Reply #1 on: April 18, 2017, 10:58:53 AM »

Found what I needed. Thanks for the replies.

73, Dick, W1KSZ
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.