The AM Forum
March 29, 2024, 08:41:07 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Microphone Stand Accessories - SOLVED!  (Read 1572 times)
0 Members and 1 Guest are viewing this topic.
ashart
Guest
« on: April 01, 2017, 05:28:56 PM »

Good day -

This issue has been solved!

To my knowledge, modern microphones and stands use extension tubes and accessories with a 5/8" thread.  However, my vintage Turner 99 mike has, and uses a stand with, 3/4" threads.

The stand on my Turner mike is too tall, and I'd like to find a shorter 2", 3", or even 4" stand-extension to fit between the base and the mike.  It would be a chrome-plated tube with a 3/4" diameter, with male 3/4" threads at each end.  A reasonable price is awaiting the right extension.

Alternatively, 2 adapters with 5/8" female threads and 3/4" male threads would allow me to use a common 5/8" extension.

Other ideas welcome, as long as they don't tell me to just use a D-104, etc.  :)

Thanks.

-al hart
al@w8vr.org
www.w8vr.org
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.067 seconds with 16 queries.