The AM Forum
April 19, 2024, 05:45:25 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: need a gear frm t368 vfo  (Read 1391 times)
0 Members and 1 Guest are viewing this topic.
wa1mtz
Member

Offline Offline

Posts: 29
« on: February 24, 2017, 11:40:28 AM »
I need the gear that is the first (or last) that fits the pto shaft, has 2 spline/Bristol set screws( which are glued in) to the brass collar. The gear is stainless steel. mine is worn on one side enuff to make it slip! Then the whole exciter is out of tune = no output    Thanks! wa1mtz@localnet.com
Logged
K6IC
Contributing
Member
*
Offline Offline

Posts: 745
« Reply #1 on: February 24, 2017, 01:41:00 PM »
Hi Michael,

The only thought about your Want,   is for you to try asking Fair Radio Sales,  in OH,  what they might have.   They have stripped some T-3s that were in rough shape in years past ...

That is all,  Good Luck,   Vic
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: need a gear frm t368 vfo
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.049 seconds with 18 queries.