The AM Forum
July 15, 2024, 05:51:09 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: PS Reactor substitution  (Read 5373 times)
0 Members and 1 Guest are viewing this topic.
xe1yzy
Member

Offline Offline

Posts: 348


« on: March 09, 2005, 01:53:09 PM »

The reactor in the PS of my BC610E are lost, the value is 11h/55ohms/0.5amps, I have available 2 reactors the value of both are 6h/250ma/90ohms, can if I put in series both as  a substitute?

what do you think guys?
or  you have any other idea  :idea:  ?
Regards
Logged

TVI WHAT TVI?
WA1GFZ
Member

Offline Offline

Posts: 11151



« Reply #1 on: March 09, 2005, 02:07:11 PM »

not enough current. Many guys increase the value to the plate supply filter cap to reduce hum. Without a choke your supply will be 2500/3000
volts.
Logged
xe1yzy
Member

Offline Offline

Posts: 348


« Reply #2 on: March 10, 2005, 10:02:53 AM »

Tnx Frank

Problem is solved, yesterday I found the choke , not exactly the same, but is a huge one, .5  amps too, hope works!

Regards!
Logged

TVI WHAT TVI?
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.078 seconds with 19 queries.