Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Shove Yank Parallel

The AM Forum
September 21, 2023, 03:44:18 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Shove Yank Parallel  (Read 4449 times)
0 Members and 1 Guest are viewing this topic.
Offline Offline

Posts: 2590

Making AM GREAT Again!

« on: May 03, 2016, 10:52:38 PM »

 OK,  have a single ended class E one transistor amp functioning.   

Want double the power.   Eventually more,  but this is the next step:

Would I be correct in approximating push pull parallel as having a binocular core xformer from drain to drain,  with the output network after that?   I realize the core would be bigger than a standard binocular,  but ya get the gist.

If not,  what am I missing.

Thanks,  in advance.

Offline Offline

Posts: 2587


« Reply #1 on: May 04, 2016, 01:24:57 PM »

I haven't had tremendous luck with traditional push pull and class E.  I have had very good success with single ended push-pull.  The single ended push pull approach scales VERY well, and you can parallel up MOSFETs for each of the single ended push-pull "modules", and then run the secondaries of the output transformers in series.

This may be the approach to take.  The harmonic suppression is also excellent.

Regards,  Steve

High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.05 seconds with 19 queries.