Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Viking Valiant front meter question




 
The AM Forum
October 16, 2019, 09:19:52 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Viking Valiant front meter question  (Read 2921 times)
0 Members and 1 Guest are viewing this topic.
xe1yzy
Member

Offline Offline

Posts: 344


« on: February 20, 2005, 04:43:55 PM »

Guys...

Who many mA should take the  V.V. meter for a full reading?

TNX!
Logged

TVI WHAT TVI?
John K5CEY
Guest
« Reply #1 on: February 20, 2005, 05:19:49 PM »

I knew at one time because I wound new meter shunts for my Valiant, but it's been over thirty years and senility has set in.

Why not disconnect the meter from the Valiant and wire it in series with your VOM, a 1.5 volt flash-light battery, and say a 5K pot?

That's the way I've always done it.

                                     John
Logged
xe1yzy
Member

Offline Offline

Posts: 344


« Reply #2 on: February 20, 2005, 08:25:42 PM »

Ok John

you answer my question and give a  good tip!

TNX!
Logged

TVI WHAT TVI?
Jim, W5JO
Member

Offline Offline

Posts: 2449


« Reply #3 on: February 20, 2005, 11:08:26 PM »

Pedro it is a 20 ohm meter.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.054 seconds with 18 queries.