The AM Forum
March 29, 2024, 12:49:02 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: D-104 Restoration Project  (Read 9416 times)
0 Members and 1 Guest are viewing this topic.
WA2SQQ
Contributing
Member
*
Offline Offline

Posts: 1090


« on: March 13, 2015, 08:37:56 AM »

For anyone considering a restoration project that includes hammer tone  paint, I’d highly recommend using the Rustoleum product now being sold by Lowes and Home Depot. I decided to bring my 1950’s D-104 into the 21st century. Somewhere along the way it got sprayed with candy apple blue paint.

I used the Goo-Gone sprayable paint stripper and removed the blue and original gray hammer tome paint with one application. To my amazement, the base was almost chrome-like and I almost decided to just clear coat it. All the minor dings and scratches were corrected with a thin coat of automotive red glazing putty. After drying, the base was wet sanded with 800 grit sand paper. One light coat of the gray hammer tone, followed by another wet sanding, and finally the second coat of the hammer tone paint. This paint needs to be applied in two or more light coats as it can “puddle” very easily.

Finally, I built and installed an FET source follower circuit using an MPF-102 to bring the D-104’s extremely high impedance down to something useable by my Flex 6500. It looks great, and sounds just like it did on yesteryear’s tube transmitters. Next project will be doing the same to my Turner 254C which was also originally gray hammer tone.


* D-104_02.jpg (829.79 KB, 2048x1536 - viewed 881 times.)

* D-104_01.jpg (910.01 KB, 1536x2048 - viewed 913 times.)
Logged
KA0HCP
Contributing
Member
*
Offline Offline

Posts: 1188



« Reply #1 on: March 13, 2015, 01:40:29 PM »

Wow, super job.  Thanks for the encouragement.
Logged

New callsign KA0HCP, ex-KB4QAA.  Relocated to Kansas in April 2019.
W3GMS
Contributing
Member
*
Offline Offline

Posts: 3063



« Reply #2 on: March 13, 2015, 02:29:16 PM »

Looks great!  A lot of folks think the D-104 are tinny microphones and that is simply not the case but you do have to know how to interface them correctly.  Its a shame the cartridges are not made anymore. 

Similar paint works on a lot of the vintage Elmac gear.  It does a great job. 

Joe-GMS
Logged

Simplicity is the Elegance of Design---W3GMS
Tom W2ILA
Member

Offline Offline

Posts: 274


« Reply #3 on: March 13, 2015, 06:23:12 PM »

That turned out great.  I have never seen that version of Rustoleum and will look forward to giving it a try.  There is another version of rustoleum in the more traditional can simply labeled Hammered.  It was tough to spray, too lite and it didn't hammer, too heavy and it pinholed. With practice it worked. 
Another brand is Hammerite which is getting tough to find but when you find a hardware store that carries it they usually have a bunch of colors.

Tom
Logged
DMOD
AC0OB - A Place where Thermionic Emitters Rule!
Contributing
Member
*
Offline Offline

Posts: 1768


« Reply #4 on: March 13, 2015, 06:34:20 PM »

Looks great!  A lot of folks think the D-104 are tinny microphones and that is simply not the case but you do have to know how to interface them correctly.  Its a shame the cartridges are not made anymore. 

Similar paint works on a lot of the vintage Elmac gear.  It does a great job. 

Joe-GMS

For sure. I need a replacement cartridge for my D-104.

Phil - AC0OB
Logged

Charlie Eppes: Dad would be so happy if we married a doctor.
Don Eppes: Yeah, well, Dad would be happy if I married someone with a pulse.NUMB3RS   Smiley
W2VW
Contributing
Member
*
Offline Offline

Posts: 3489


WWW
« Reply #5 on: March 13, 2015, 06:36:07 PM »

Thanks for posting an actual D-104 restoration thread instead of some of the hackery usually seen with these mics.
Logged
k3pf
Member

Offline Offline

Posts: 19


« Reply #6 on: March 14, 2015, 02:15:11 PM »

I found a crystal element rebuild kit for the D-104 microphone at the Northland Drifter's site.  Go to this web address to see the order info.  http://www.rbmicro.com/
Logged
W9BHI
Member

Offline Offline

Posts: 397



« Reply #7 on: March 14, 2015, 02:19:10 PM »

What brand of hammertone paint did you use?

Don W9BHI
Logged
k7iou
Member

Offline Offline

Posts: 137


Johnson Viking Five Hundred


« Reply #8 on: March 14, 2015, 06:12:40 PM »

What brand of hammertone paint did you use?

Don W9BHI

RUSTOLIUM see 2nd picture in 1st post.

Or if you have your own spray gun and air compressor this is the paint that matched the WRL Globe King 500
http://www.idealtruevalue.com/store/p/169644-QT-Silver-Hammered-Finish-Self-Priming-Paint-Can-Be-Applied-Directly-O.aspx?feed=Froogle&gclid=CICb8KTFqMQCFYRufgoduG8A4g

http://www.walmart.com/ip/Masterchem-43105-1-Quart-Silver-Gray-Hammerite-Rust-Cap-Enamel-Interior-Paint/21798233

http://www.qsl.net/wa5cmi/cabinet.htm
 
Logged

de k7iou
N2DTS
Contributing
Member
*
Offline Offline

Posts: 2307


« Reply #9 on: March 14, 2015, 10:01:44 PM »

I have used the hammered finish paint on some motorcycle and car stuff and it works very well, very tough finish.
I also used it on a bunch of rusty side supports that hold the front panel to the chassis, you can paint right over light rust.
Its a great look for a d104 base.

They also make gold hammered finish.

There is also cast finish, a cast alluminum look, but its flat, looks like flat silver/grey paint and does not hold up well.
Logged
WA2SQQ
Contributing
Member
*
Offline Offline

Posts: 1090


« Reply #10 on: March 16, 2015, 09:49:12 AM »

A few people asked me about the source follower circuit I added.
I actually combined two circuits. The main circuit was explained at the link below.
I added the bass and treble adjustments shown in the attached photo.

http://www.qsl.net/hcara/Improving_the_D-104_N9WB_rev2.pdf


* D104.jpg (53.83 KB, 301x410 - viewed 922 times.)
Logged
WA2SQQ
Contributing
Member
*
Offline Offline

Posts: 1090


« Reply #11 on: March 16, 2015, 09:54:05 AM »

What brand of hammertone paint did you use?

Don W9BHI

Rustoleum - see the photos I posted
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.076 seconds with 18 queries.