The AM Forum
April 25, 2024, 03:37:29 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: UTC CVM-2 info requested  (Read 2673 times)
0 Members and 1 Guest are viewing this topic.
W4TWA
Member

Offline Offline

Posts: 15


« on: January 29, 2015, 09:40:12 PM »

I'm going to use the CVM-2 vari-match mod transformer for my project. Does anyone have the connection sheet that shows the impedance of all the taps?
If you could post it here I would greatly appreciate it!
Logged
w1vtp
Member

Offline Offline

Posts: 2638



« Reply #1 on: January 29, 2015, 09:54:53 PM »

http://www.k7jrl.com/pub/manuals/transformers/MUTC/UTC_MOD.HTM
Logged
W4TWA
Member

Offline Offline

Posts: 15


« Reply #2 on: January 29, 2015, 10:11:48 PM »

You da man. Thanks!  Smiley
Logged
Steve - K4HX
Administrator
Member

Offline Offline

Posts: 2727



« Reply #3 on: January 30, 2015, 07:50:18 AM »

http://www.amwindow.org/tech/htm/modtran/utc/cvm.htm
Logged
w1vtp
Member

Offline Offline

Posts: 2638



« Reply #4 on: January 30, 2015, 10:55:03 AM »


Yeah, Steve.  I had posted that link at first but removed because the other one had both sets of data: the power ratings of the particular CVM series and the connection data.  It's important for newcomers to note that the connection data works for VM and CVM units.

Shuda left the link in  Grin

PS: Steve.  For some reason when I bring up that link in a new tab, my Internet Explorer locks out closing the tab when I finish.  Dunno why, just a FYI.

PPS:  Firefox works fine.  Micro$oft has done it again

Al
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.034 seconds with 19 queries.