The AM Forum
October 09, 2024, 04:12:22 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Triode connecting 4-400's...?  (Read 7047 times)
0 Members and 1 Guest are viewing this topic.
WB1AEX
Guest
« on: January 22, 2005, 11:25:16 AM »

I am curious about the best way to go about this when subbing out a pair of 3-500's in an RF linear.  I have searched around and found that some say to simply tie the grid and screen together and be done with it.  Others tie the grid and screen together through a small resistance of 10 ohms or so, claiming it is easier to drive and is more linear.  Not sure about that one.  A few have suggested connecting the screen to the plate.  That sounds like a recipe for a flashover from screen to grid but I guess some have had success with it.  Anyone tried any of the above with success?

Thanks for sharing any experiences or for any suggestions,

Rob WB1AEX
Logged
WA1GFZ
Member

Offline Offline

Posts: 11151



« Reply #1 on: January 22, 2005, 08:50:33 PM »

Rob,
Just plug them in. The gain will be a tad lower. I know a guy who did this and IRan a 4-1000A that way for years. fc
Logged
WA1HZK
Member

Offline Offline

Posts: 1104


WWW
Yup
« Reply #2 on: January 22, 2005, 10:24:52 PM »

Strap the grid & screen together. Works pissa. Cheaper than a pair of 500's when you have a box full of 400's.
Keith
Logged

AM is Not A Hobby - It's a "Way of Life"!
Timmy, Sometime in 2007 on a Mountain Far Away..
www.criticalradio.com
www.criticalbattery.com
www.criticaltowers.com
www.criticalresponder.com
Official Registered "Old Buzzard"
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.06 seconds with 18 queries.