The AM Forum
October 09, 2024, 10:00:38 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: DX-100 knobs and chassis  (Read 7392 times)
0 Members and 1 Guest are viewing this topic.
K9DXL
Member

Offline Offline

Posts: 150


« on: February 19, 2014, 01:24:35 PM »

I'm in the process of getting a DX-100 back on its feet.  1.  Does anyone have a source for replacing the concentric knobs used for VFO-Crystal/Drive and Coarse/Fine loading controls?  The old plastic is brittle and splits apart.  2.  Short of taking the whole thing apart and blasting then re-plating the chassis, what's the best method for cleaning up the discolored and lacquered chassis?
Thanks, Jim
Logged

Breathing solder fumes since 1959.  That explains a lot.
Jim, W5JO
Member

Offline Offline

Posts: 2508


« Reply #1 on: February 19, 2014, 03:42:07 PM »

Glen Zook, K9STH makes the knobs.  Do a search for him and he can help.
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.046 seconds with 19 queries.