The AM Forum
April 25, 2024, 03:22:10 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: -3dB..................  (Read 3378 times)
0 Members and 1 Guest are viewing this topic.
RolandSWL
Contributing
Member
*
Offline Offline

Posts: 255
« on: December 06, 2013, 08:15:49 AM »
Does anyone have a spec. for the audio frequency response for an UN-molested Viking Valiant?

RSWL..................
Logged
WA4JK
Member

Offline Offline

Posts: 245
« Reply #1 on: December 06, 2013, 10:39:06 AM »
It is not stated in the manual, but I would be very surprised if the range was not between 300-2700.
Logged
RolandSWL
Contributing
Member
*
Offline Offline

Posts: 255
« Reply #2 on: December 06, 2013, 11:21:12 AM »
Thanks for the info.

RSWL................
Logged
steve_qix
Contributing
Member
*
Offline Offline

Posts: 2599


Bap!


WWW
« Reply #3 on: December 06, 2013, 04:13:32 PM »
Quote from: WA4JK on December 06, 2013, 10:39:06 AM
It is not stated in the manual, but I would be very surprised if the range was not between 300-2700.

That's a pretty good number.... and the response probably isn't flat, even in this restricted range - and there will be a lot of distortion.
Logged
High Power, Broadcast Audio and Low Cost?  Check out the class E web site at: http://www.classeradio.org
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 8166


CQ CQ CONTEST


WWW
« Reply #4 on: December 06, 2013, 05:38:35 PM »
Page 4 of the Valiant manual says:  "audio filter consisting of C94, C95, and L45 keep the frequency response to the range 250 to 3000 cycles."
Logged
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: -3dB..................
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.052 seconds with 18 queries.