Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
BC-454 B receiver FS 3.0 to 6.0 Mhz with power supply. SOLD




 
The AM Forum
August 20, 2019, 07:08:10 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: BC-454 B receiver FS 3.0 to 6.0 Mhz with power supply. SOLD  (Read 1889 times)
0 Members and 1 Guest are viewing this topic.
WA2TTP Steve
Member

Offline Offline

Posts: 229


« on: October 21, 2013, 08:54:20 PM »

BC-454 B receiver 3.0 to 6.0 Mhz manufactured by Western Electric in good condition. The receiver has the usual ham mods of the day with the earphone jack, volume control and BFO switch mounted in the front plug in panel. It also has an AC power supply built onto the rear deck with a 6X4 rectifier. I tested the receiver and it works ok with a sensitivity of about 1 uv for a CW signal. There is a hum in the audio so the filter caps might be bad. The case has a few scrapes and dents but not to bad. The front panel has a dent on the upper left corner. The tube compartment is spotless and tube layout graphic on the cover is perfect. Includes the tuning knob.

$50 plus shipping

Email any questions to srosenb2@nycap.rr.com

Steve
WA2TTP


* P1030118.JPG (164.68 KB, 480x640 - viewed 291 times.)

* P1030119.JPG (166.5 KB, 640x480 - viewed 296 times.)

* P1030123.JPG (164.82 KB, 480x640 - viewed 310 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.042 seconds with 18 queries.