The AM Forum
April 19, 2024, 08:53:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: M205 AC Fuse for AM Xmtr  (Read 1543 times)
0 Members and 1 Guest are viewing this topic.
K4RT
Contributing
Member
*
Offline Offline

Posts: 520



« on: November 12, 2013, 12:07:08 AM »

Have you used a glass M205 fuse(s) on the AC line for an AM transmitter? The M205 fuse is 5mm x 20mm (smaller physically than 3AG). Any problems using M205? Any comparisons with 3AG?

73,
Brad
Logged
pa0ast
Member

Offline Offline

Posts: 62


« Reply #1 on: November 12, 2013, 02:04:07 PM »


For me the spec's are the same.
glasfuse spec. 5x20mm
Slow (T) or fast (F) or sand filled for explosion safety.

Specifications
Construction: glass tube
Ferrule caps: brass, nickel-plated
Rated Voltage: 250 V
Breaking capacity: 35 A

The following values are available:
0,032 - 0,05 - 0,063 - 0,080 - 0,1 - 0,125
0,16 - 0,25 - 0,315 - 0,5 - 0,63 - 0,8 -1
1,25 - 1,6 - 2 - 2,5 - 3,15 - 4 - 5
6,3 - 8 - 10 - 12 - 16  Ampere.

    
Glasfuse 32x6mm   Slow (T) or fast (F)

Specifications
Construction: glass tube
Ferrule caps: brass, nickel-plated
Rated Voltage: 250 V
Breaking capacity: 35 A

The following values are available:
0,032 - 0,05 - 0,063 - 0,080 - 0,1 - 0,125
0,16 - 0,25 - 0,315 - 0,5 - 0,63 - 0,8 -1
1,25 - 1,6 - 2 - 2,5 - 3,15 - 4 - 5
6,3 - 8 - 10 - 12 - 15 - 16  Ampere.

RGDS Anton
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.042 seconds with 19 queries.