The AM Forum
December 09, 2024, 09:28:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: QSO with W5VB  (Read 7780 times)
0 Members and 1 Guest are viewing this topic.
ka4koe
Contributing
Member
*
Offline Offline

Posts: 1149


It's alive. IT'S ALIVE!!!


« on: July 21, 2013, 01:46:24 PM »

Just finished a chat with W5VB on 29.000. The band is open but no one is around but Jeff and I. Found out how tricky this Valiant is to get tuned on 10m. Putting out 100 watts of carrier. Jeff reported no issues with my audio. The R388 seems plenty sensitive on this band.

Philip
Logged

I'm outta control, plain and simple. Now I have a broadcast transmitter.
W2VW
Contributing
Member
*
Offline Offline

Posts: 3483


WWW
« Reply #1 on: July 21, 2013, 08:38:05 PM »

Where were you last night at 20:43 when I was on with Paul K8IO?

Established contact with 8 watts and antenna at 35'.

Came back 10 minutes later with stuff setup the right way and talked for about 20 minutes.

Logged
ka4koe
Contributing
Member
*
Offline Offline

Posts: 1149


It's alive. IT'S ALIVE!!!


« Reply #2 on: July 21, 2013, 08:47:41 PM »

Trying to get the shack back together. Been working on the R388. Its back in the rack now. Can't use a Valiant without a receiver.
Logged

I'm outta control, plain and simple. Now I have a broadcast transmitter.
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.133 seconds with 19 queries.