W3FJJ
Contributing
Member
 Offline
Posts: 159
|
 |
« on: July 04, 2013, 09:22:03 AM » |
|
From left to right in picture
3 plate transformers
1. 4400v at about 3/4 amp?, (no center tap) 200v,215v, 220v 240v input taps, pulled from
Henery 2000d , 3cx3000a7 Amplifier. Elec. corp of amaerica model eca-1028
2000d was made to run at 4200v dc out, this xfrm
has two high voltage taps, I belleve it can run 5000v easily.
I believe this is same transformer Used in the Henery 8K ultra amplifier. $150
2. Stancor 52C046 5000v Center tap at 3/4 amp?, 120v pri, I believe this hallicrafters
Part number and was pulled from HT4/ BC610 transmitter $75
3. 4800V (no center tap) at 3/4 amp? pri taps 208v, 230v, , $75
One Large Variac, Power Stat type s780, 220v input, 0-270v out at 28 amps, Has a geared motor, that turns it slowly,
could then be easily remote controled! $125
All these Items are pick up only, located in Newark DE 19713, not far from I 95 and DE/MD border..
|
