The AM Forum
April 24, 2024, 09:24:06 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: CNC Shop  (Read 3182 times)
0 Members and 1 Guest are viewing this topic.
aa5wg
Member

Offline Offline

Posts: 435
« on: July 03, 2012, 06:09:47 PM »
Anyone know of a ham that owns or works with a CNC plastics/machine shop
or abrasive waterjet shop?

I have some G10/FR4 green fiberglass that needs some CNC cutting.

Thanks to all.

Chuck
Logged
N9EFJ
Guest
« Reply #1 on: July 05, 2012, 06:58:08 AM »
I have a small [ no more than 9X12 inches] CNC setup.

If you have the PLT code from CorelDraw I may be able to help.

Carl
Logged
aa5wg
Member

Offline Offline

Posts: 435
« Reply #2 on: July 05, 2012, 08:23:06 AM »
Carl:

This part is longer than 12 inches.

Thank you.

Chuck
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: CNC Shop
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.048 seconds with 18 queries.