The AM Forum
May 22, 2013, 03:46:24 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Recent 17 Meter AM activity  (Read 12357 times)
0 Members and 1 Guest are viewing this topic.
WS4B
Contributing
Member
*
Offline Offline

Posts: 84


« on: June 24, 2012, 10:42:04 PM »

I have been working 17 Meter AM wherever there has been a 10 Kc open space after 01:00 GMT the past few evenings. The band is very quiet, yet still open. Response the past few evenings has not only been favorable, but energetic. I get the expected " my first 17 Meter AM contact" response. Satanic slop bucket QRM has been non-existent. I thought I would share to encourage more of the same during that time period.
Logged

FT-102 (3-6146s) into SB-220 amp out of 1/4 vertical with 48 radials. It's not fancy, but it works!!!
kb3rdt
Member

Offline Offline

Posts: 205


« Reply #1 on: June 25, 2012, 08:23:44 PM »

What Frequncy!
Logged
WS4B
Contributing
Member
*
Offline Offline

Posts: 84


« Reply #2 on: June 25, 2012, 09:11:08 PM »

What Frequncy!


I have been simply calling CQ on the upper edge of the band, as it appears there is more activity near the middle and lower end of the designated phone portion. So I have been above 18.155, yet always below 18.163. I have been getting responses within 5 to 10 minutes from my initial CQ. It's been fun, and I am always up for a Sked!
Logged

FT-102 (3-6146s) into SB-220 amp out of 1/4 vertical with 48 radials. It's not fancy, but it works!!!
KB2RSK
Member

Offline Offline

Posts: 7


« Reply #3 on: July 06, 2012, 12:29:29 PM »

 I will be listening as well. ( Might even call a few CQ's )
  My QRP rig at 10 watts ( 857D)  and an OCF dipole.
 I have worked a few west state side contacts and few BC .
  73's
  KB2RSK
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2013
Powered by SMF 1.1.18 | SMF © 2013, Simple Machines
Page created in 0.273 seconds with 18 queries.