Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
QRP KB2RSK




 
The AM Forum
May 24, 2018, 01:45:41 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: QRP KB2RSK  (Read 13457 times)
0 Members and 1 Guest are viewing this topic.
KB2RSK
Member

Offline Offline

Posts: 7


« on: April 30, 2012, 07:21:09 AM »

 I had fun running QRP 5 watts from a Yaseau 857D  I was impressed as to the low noise level and the listening of weak stations that I would normally of missed from inside the shack with all the QRM running from appliances and neigborhood hardware.
 The roof rack antenna  is just a 17 to 20 foot extension aliuminum pole used for snow removal from roofs  which I stood upright against a tree and ran 50 foot of coax cable to ( using the shield as the ground with about 40 foot of  # 14 insulated wire laying on the ground. I was getting any wheres from a 1 to 3 to 1 to 2 swr across the 17 meter Band.
 The battery was a sealed 12 volt at 7 amps. I was able to receive and transmitt with this for about 8 hours running 5 watts of RF.
  It certainly was fun to operate QRP
  73's  From Jim  KB2RSK


* PICT0548.JPG (501.51 KB, 1600x1200 - viewed 523 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.043 seconds with 19 queries.