The AM Forum
April 16, 2024, 04:19:39 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: audio caps viker 2 cdc  (Read 4309 times)
0 Members and 1 Guest are viewing this topic.
ve6pg
Member

Offline Offline

Posts: 1114
« on: June 05, 2012, 06:58:59 AM »
..my dwg is not clear....what are the values of the cap, and resistor from pin 2 to gnd?...what if these are just buy-passed?..
..tim..

..sk..
Logged
...Yes, my name is Tim Smith...sk..
WA2ROC
Contributing
Member
*
Offline Offline

Posts: 287
« Reply #1 on: June 05, 2012, 07:06:03 AM »
May I ask "Pin 2 of what?"
Logged
Dick Pettit WA2ROC 
Vintage Heathkit Equipment
If You Cannot Stand Behind Our Troops, Please Feel Free To Stand In Front Of Them!
ve6pg
Member

Offline Offline

Posts: 1114
« Reply #2 on: June 05, 2012, 07:09:05 AM »
ptt jack pin 2 goes thru a cap, and resistor...do you have the dwg?
..tim..

..sk..
Logged
...Yes, my name is Tim Smith...sk..
WA2ROC
Contributing
Member
*
Offline Offline

Posts: 287
« Reply #3 on: June 05, 2012, 07:32:00 AM »
I figured it was a Pin 2 of a tube, not a PTT jack. 

I only have schematic of standard V2, not the CDC version.
Logged
Dick Pettit WA2ROC 
Vintage Heathkit Equipment
If You Cannot Stand Behind Our Troops, Please Feel Free To Stand In Front Of Them!
ve6pg
Member

Offline Offline

Posts: 1114
« Reply #4 on: June 05, 2012, 07:37:16 AM »
..looking at my post, i am not surprised at the confusion...too early, not enough sleep...even spelling errors...!

..sk..
Logged
...Yes, my name is Tim Smith...sk..
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: audio caps viker 2 cdc
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.047 seconds with 19 queries.