Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Notes on Restoring a National NC-300

The AM Forum
January 18, 2022, 02:34:51 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
Author Topic: Notes on Restoring a National NC-300  (Read 5177 times)
0 Members and 1 Guest are viewing this topic.
Steve - K4HX
« on: December 15, 2011, 08:01:37 PM »

Thanks to Ken, K6FC for sharing.


Jim, W5JO

Offline Offline

Posts: 2480

« Reply #1 on: December 15, 2011, 10:19:29 PM »

He doesn't mention L6.  If you have one of these receivers and L6 hasn't been converted to a crystal oscillator, then I suggest you do.  That eliminates a problem that plagued many of these receivers over time contributing to frequency calibration.  Suspect cause was humidity causing the coil form to change inductance values, and the setting of that core if very critical.
Pages: [1]   Go Up
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.063 seconds with 19 queries.