The AM Forum
April 19, 2024, 06:34:39 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: WTT R-390A and B&W 5100 for Flex Radio SOLD  (Read 2532 times)
0 Members and 1 Guest are viewing this topic.
n1tnq
Member

Offline Offline

Posts: 90


« on: November 21, 2011, 07:13:27 PM »

Teledyne Systems R-390A receiver& B&W 5100B Transmitter
I want to trade a Teledyne Systems 35064-PC-62 SN-3552 R-390A receiver for a flex radio.
The R-390 A is restored electrical and is one hot receiver,looks great and works great.It comes with a 600 ohm input transformer so you can use a 8 ohm speaker and has the Twinax connector for the antenna. Here is what has been done to it.
New ecectrolyics in the power supply
3 prong power cord
New caps and resistors threw the receiver
receiver taken apart and cleaned
The tunning Gear Train taken apart and cleaned and lubed (It is silky smooth)
Receiver was aligned (this is a plug and play receiver and is hot on all bands)
Tubes were replaced as need
Also have a clean and working B&W 5100 B Transmitter
E-mail me for pictures at gtb032161 at aol.com
PriceR-390A receiver $1200.00 shipped to the lower 48 and the B&W transmitter $350.00 or trade for a flex radio
SOLD
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.065 seconds with 18 queries.