Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
AM Operation Using Power SDR with Flex and Other SDR Platforms




 
The AM Forum
May 22, 2017, 01:14:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: 1 ... 3 [4]   Go Down
  Print  
Author Topic: AM Operation Using Power SDR with Flex and Other SDR Platforms  (Read 218740 times)
0 Members and 1 Guest are viewing this topic.
WD5JKO
Member

Offline Offline

Posts: 1630


WD5JKO


« Reply #75 on: August 28, 2016, 06:31:04 PM »

Jim:
From your attached picture, what's the lower right meter used for in your Flex-3000?

Pete,

  It is a duplicate of the main transmit meter. I like to use the original meter to look at Forward Power, and the 2nd meter to look at one of the audio levels such as EQ.

For those with a F5K with 2nd receiver, the 2nd meter does what it always did. For those of us with a F1.5K or F3k, this 2nd meter function is a nice addition.

Jim
Wd5JKO


* Two_meters_F3k.jpg (72.81 KB, 192x758 - viewed 104 times.)

* Two_meters_F3k_.jpg (90.76 KB, 624x419 - viewed 90 times.)
Logged
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 7647


CQ CQ CONTEST


WWW
« Reply #76 on: August 28, 2016, 09:16:32 PM »

I forgot you can bring up the second meter in the transmit profile. I just pulled down T9 (I was running T8) and installed it and diddled with the settings. Works fine. Weeks ago I upgraded the shack PC to Win 10, 64 bit, and added 8 Gig of memory. The machine was running Vista 32 bit with only 3 Gigs of memory and CPU usage was always high. I still would like to find a program that would shut down some processes on the "new" machine that I don't need when I'm running the Flex 5000 and some of the digital programs. I use to run GBOOST on the old machine which worked great but evidently the server(s) that activated the software no longer are functional.
Logged

Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
WD5JKO
Member

Offline Offline

Posts: 1630


WD5JKO


« Reply #77 on: September 08, 2016, 09:56:56 PM »


Pete,

   The use of Win 10 to run radios has been largely successful. Darrin, Ke9NS has a section on his F5K page on Win10, and how to tweak it. There are lots of issues with Win10 though after some of the MS updates and how they impact the SSDR users.

   The T9 PowerSDR up till a few days ago used a Microsoft installer. Therefore to upgrade further you need to uninstall from Control Panel like most any Windows program. Now moving on from here, he has went to a different installer that will not be seen in Control Panel programs list. This is a little confusing.

   Here is a recent post from Darrin showing the current features of his T9 revision of PowerSDR:

https://community.flexradio.com/flexradio/topics/powersdr-2-7-2-ke9ns-revision-t9-available-for-download

Jim
Wd5JKO
Logged
W1AEX
Un-smug-a-licious
Contributing
Member
*
Offline Offline

Posts: 1431


ANAN 100 SDR


WWW
« Reply #78 on: January 26, 2017, 12:03:07 PM »

The link below leads to a setup guide for attaining audio level settings that are optimal when adjusting each gain stage in the transmit chain of the PowerSDR mRX PS software. The short story is that while the GUI interface resembles the Flex version of PowerSDR the reality is that the entire transmit audio chain from front-to-back is completely different. The bottom line is that it is absolutely critical to make sure that you are regularly reaching 0dB on voice peaks while transmitting and observing the ALC meter.

This will assure that the Pure Signal algorithm samples your RF signal frequently to allow the adaptive pre-distortion protocol to apply an optimal correction to your output signal. It is almost a worry-free setup as the look-ahead algorithms at the LEVELER and ALC points in the transmit chain of the software make it absolutely impossible to drive the transmitter into clipping. It doesn't matter if your setup is simply a microphone plugged into the front panel, or an audio rack plugged into the rear panel DB25 line level input, or even a VAC setup using DAW audio processing software, getting it right is simple as long as your MIC/VAC, EQ, and LEVELER are adjusted correctly.

Hope this makes it simpler for all the guys who are just starting out!

73,

Rob W1AEX  

http://www.w1aex.com/anantxgain/anantxgain.html
Logged

One thing I'm certain of is that there is too much certainty in the world.
W1AEX
Un-smug-a-licious
Contributing
Member
*
Offline Offline

Posts: 1431


ANAN 100 SDR


WWW
« Reply #79 on: March 27, 2017, 12:58:22 PM »

A couple of new items for the ANAN platform of SDR rigs:

New firmware release for the Hermes based ANAN-100 rigs (Hermes_v3.2.rbf) available at this link:  

https://github.com/TAPR/OpenHPSDR-Firmware/releases

New OpenHPSDR mRX PS release for all platforms. This incorporates the new Pure Signal 2.0 pre-distortion protocol which is far more robust in its capability to correct problematic linear amplifiers that exhibit memory effects. Additionally, the Pure Signal 2.0 protocol can be enabled via the front panel GUI and will remain toggled on persistently each time OpenHPSDR mRX PS is started up as long as the PS-A button (seen in the upper left of the image below) remains engaged.

https://github.com/TAPR/OpenHPSDR-PowerSDR/releases

New beta release of CuSDR (version 3.3.0 QT5) from Herman. There is no installation for this program, just download the zip file, extract the files to any folder of your choosing and run it from there. I found it necessary to let the program run with admin privileges otherwise I received an error message (The program has stopped working) when it was started. This version does not yet have the WDSP protocol installed, but it looks beautiful, runs smoothly, and is very stable. I was able to open up 5 receivers simultaneously (seen in the second image below) in addition to running the wideband RX display of the spectrum from VLF through 64 MHz.

https://github.com/hvh/cusdr3/files/862159/cusdr3.zip

I made a YouTube video of CuSDR v3.3.0 (QT5.4.0) as I was listening to an AM conversation on 75 meters yesterday. The fidelity of CuSDR is very nice and rivals OpenHPSDR mRX PS when tuning the AM broadcast band.

https://www.youtube.com/watch?v=sYIkvBrSITU

Lots of good stuff to play with!

Rob W1AEX


* v3.3.14 PS2.jpg (156.59 KB, 1247x746 - viewed 19 times.)

* CuSDR v3.3.0 5 receivers.jpg (228.86 KB, 1356x828 - viewed 20 times.)
Logged

One thing I'm certain of is that there is too much certainty in the world.
Pages: 1 ... 3 [4]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.063 seconds with 18 queries.