Warning: Creating default object from empty value in /homepages/11/d132647312/htdocs/Amfone/mkportal/include/SMF/smf_out.php on line 47
Restoring the sheen on Bakelite




 
The AM Forum
November 13, 2018, 11:50:13 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
  Print  
Author Topic: Restoring the sheen on Bakelite  (Read 6998 times)
0 Members and 1 Guest are viewing this topic.
w3jn
Johnny Novice
Administrator
Member

Offline Offline

Posts: 4574



« on: June 12, 2005, 12:39:31 PM »

OK, so you done used some cleaner on that bakelite bezel or knob and now it's dull and lifeless.  Here's a method that's worked well for me.  It puts a pretty decent shine back on, but isn't quite to new.

Get some Brasso or Simichrome (metal polishes with very fine abrasive suspended in a petroleum/wax fluid or paste).  If you're dealing with knobs, take an old volume control, cut the shaft off, and attach the knob to the end.  Make sure you tighten the set screws, then chuck the whole thing in a drill press.  Wet a rag with the polish, and polish the flat portions of the knob, the skirt, etc.  Flutes and knurls will tend to build up the polish so do this by hand.

For escutcheons, bezels, etc., use the same type of polish, but use plenty of elbow grease.  A bench buffer sometimes works nicely for this but be careful that it doesn't catch on the wheel - that'll wreck the part in short order.

If the bezel has scratches, sand it down with wet 400/800/1000 grit progressively on a sanding block.  Then polish using the above compounds.
Logged

FCC:  "The record is devoid of a demonstrated nexus between Morse code proficiency and on-the-air conduct."
Pages: [1]   Go Up
  Print  
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.043 seconds with 20 queries.