The AM Forum
April 20, 2024, 10:21:25 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Calendar Links Staff List Gallery Login Register  
Pages: [1]   Go Down
« previous next »
  Print  
Author Topic: Yaesu ft-450 mute help  (Read 3901 times)
0 Members and 1 Guest are viewing this topic.
WA4JK
Member

Offline Offline

Posts: 245
« on: September 25, 2010, 02:07:36 PM »
I need some help if one of you guys have the time. My 4h4c bit the dust and so in lost me am receiver  the nc-300. I have my ft-450 with me on the road in the tv but I left the manual and drawings back at home. What I'm looking for are the two pi s that. An be used to mute the receiver from contact action. I'm thinking it may be on the control cable plug. If someone could look at the drawing or manual and let me know I'll beable to use the 450 as my receiver until I can get a tu e in. Thanks
Logged
Pete, WA2CWA
Moderator
Member

Offline Offline

Posts: 8163


CQ CQ CONTEST


WWW
« Reply #1 on: September 25, 2010, 02:47:43 PM »
Use a 6V6 in place of it.

Yaesu FT-450 manual: http://www.yaesu.com/downloadFile.cfm?FileID=3806&FileCatID=158&FileName=FT%2D450%5FOM%5FENG%5FEH024H102.pdf&FileContentType=application%2Fpdf
Logged
Pete, WA2CWA - "A Cluttered Desk is a Sign of Genius"
WA4JK
Member

Offline Offline

Posts: 245
« Reply #2 on: September 25, 2010, 03:26:57 PM »
Thanks Pete but all I have here is the iPhone so I can't download the manual. I'll need someone to do the research. Sorry
Logged
Pages: [1]   Go Up
  Print  
The AM Forum  > THE AM BULLETIN BOARD > Technical Forum > Topic: Yaesu ft-450 mute help
 « previous next »
 
Jump to:  

AMfone - Dedicated to Amplitude Modulation on the Amateur Radio Bands
 AMfone © 2001-2015
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines
Page created in 0.053 seconds with 18 queries.